Skip to main content

Presenting from PowerPoint

Murmle can run inside a PowerPoint deck. Each Murmle slide shows a live part of the session - the join code, a question with its results, the leaderboard, the closing totals - and the slide show moves the session along as you move through the deck. Participants join and answer on their own devices exactly as they do for any other session.

Where this has been tested

Murmle in PowerPoint has been tested in PowerPoint for the web and PowerPoint for Windows. PowerPoint for Mac and for iPad are being verified, and this page will say so when they are.

Installing the add-ins​

Murmle comes to PowerPoint as two add-ins, installed together:

  • The Murmle slide - a content add-in that sits on a slide and shows the live session.
  • The Murmle panel - a side panel, opened from a Murmle button on PowerPoint's Home tab, that adds linked slides to the deck for you.

The panel works by adding copies of the Murmle slide, so it is no use on its own: install both. Each add-in is a manifest file made for your organisation's Murmle address; ask whoever runs Murmle for your organisation for the two files. There are two ways to install them:

  • One person: in PowerPoint, choose Insert > Add-ins, then Upload My Add-in, and upload each of the two files. An add-in uploaded this way in PowerPoint for the web can drop out of the browser after a while ("We couldn't get the information needed to start this add-in"); upload it again if that happens.
  • Everyone in the organisation: a Microsoft 365 administrator deploys both files once, through centralised deployment in the Microsoft 365 admin center. Nobody then has to upload anything.

Murmle is not listed in Microsoft's add-in store yet, so it cannot be found by searching the store.

Signing in​

The first time a Murmle slide or the panel opens, it asks you to Sign in. Sign-in opens in a separate window, with the same providers as the console. The slide and the panel share the sign-in, so you sign in once for both.

Adding slides​

The first Murmle slide​

PowerPoint only lets an add-in onto a slide from its own menu, so the first Murmle slide in a deck comes from Insert > Add-ins > Murmle. If you press Add slide in the panel before the deck has one, the panel says so. Once there is one, every other slide can come from the panel, and when the panel opens it fits a slide added from the menu to the whole slide and clears its empty title and text boxes.

From the panel​

Press Murmle on the Home tab. Choose the activity, what the slide shows (below) and, for a question or results slide, the question. Add slide puts it after the selected slide, already linked and the size of the slide. Adding a slide can take several seconds; the button says Saving... until it is in.

Add all slides adds everything an activity needs in one press: a join slide, a live question slide for each question in order, and a summary slide. If one of them cannot be added, it stops and says how many went in, so pressing it again does not add the rest twice.

Add each Murmle slide from the panel (or from Insert > Add-ins). Do not duplicate a Murmle slide in PowerPoint: a copy made that way can show the original's content in the show.

Your own slides can sit between Murmle slides as usual.

A new question from the deck​

Instead of choosing From an activity, choose New question to write a question without leaving PowerPoint: multiple choice, word cloud, open text, rating or Q&A, with up to 300 characters for the question and up to 8 options. It is added to the deck's activity (or to a new activity made for the deck) and published. If that activity has unpublished changes in the console, Murmle refuses rather than publish your half-finished edits with it: publish or discard them first.

What a slide can show​

SlideShowsIn the slide show
Live questionThe question with its results.Arriving on it moves the session to that question.
Results onlyA question's results, later in the deck.Shows them without taking the room back to the question.
Join slideThe join address, code and QR code, with a count of who has joined that grows as people arrive. Usually the first slide.Never moves the session.
LeaderboardThe quiz standings as they are when the slide is shown.Never moves the session.
Summary slideThe session's totals and End session. Usually the last slide.Closes voting on the question still open (see below).

A live question slide has three options:

  • Open voting when the slide appears - on by default. Turn it off to open voting yourself.
  • Close voting when I leave the slide - off by default, so latecomers can finish while you talk over the next slide.
  • Show the join code beside the question - on by default.

Results follow the activity's Show results on the wall setting, as they do on the presenter view - see Running a session.

Running the show​

Start the slide show as usual. Each slide finds the session to run: a session of the activity you already have open, or a new one.

  • Continue or start fresh. If you already have an open session of this activity that is in use - it has participants or answers, or has moved past its lobby - the first Murmle slide asks once: Continue that run or Start a fresh run. Every slide of that show follows your answer, and nothing is asked again mid-show. This question appears on the slide, so if it is projected the room sees it too.
  • The first question goes live with a press. The first question slide of a show shows its question with Go live with this question. Pressing it opens that question in the session.
  • After that, question slides go live by themselves as you reach them, going forwards or back. If a slide cannot be sure it is the one on screen, it waits and offers Go live with this question again rather than move the room to the wrong question.

The controls on the slide​

In the corner of every live slide is a Murmle button with a line saying what the room sees and what happens next, for example "Voting open · results appear when you close voting". Click it, or move the mouse, to show the controls: the action this moment offers (such as Open voting or Close voting & show results), the join code panel, and a menu to Start a fresh run or join another open run. Space opens or closes voting and J shows or hides the join code.

Moving between questions is the slide show's job: the arrow keys still move through the deck after you have clicked a slide. Esc cannot end the show once a Murmle slide has the keyboard; the slide says "To end the show, use End show in PowerPoint's toolbar."

If a slide cannot be live - it has lost the connection, or its question has been removed from the activity - it still shows the question and how to join, with a Not live badge and the reason, so the room never sees a blank frame or an error page.

The summary slide​

Arriving on the summary slide closes voting on the question still open, without moving the session on. It shows:

  • how many joined;
  • how many answered at least once;
  • how many questions were asked;
  • answers expected (joined times questions asked) and answers received, with the rate.

These are counts only, the same in every privacy mode.

While the summary slide is up, each participant's device shows its own recap - "That's all the questions.", any closing message, how many questions they answered, and that the presenter will close the session shortly. Going back to a question slide takes every device back to that question.

End session asks once more on the slide, then closes the session for everyone: participants' devices show the finished screen (with a quiz score and place where they apply), late answers are refused, and the join code is released. You can also end the session from the run console as usual. Results and export are in the console afterwards - see Results and export.

Known limits​

  • Tested in PowerPoint for the web and PowerPoint for Windows. PowerPoint for Mac and for iPad are being verified.
  • Installed by uploading the two manifest files or by an administrator's centralised deployment; not yet in Microsoft's add-in store.
  • The first Murmle slide of a deck has to come from Insert > Add-ins.
  • Don't duplicate Murmle slides; add each one from the panel.
  • Esc does not end the show once a slide has the keyboard; use End show in the toolbar.
  • The presenter's text on the slide - the controls, the summary's labels - is in English. The participant's own device is in their language as usual.
  • Testing as a participant from two tabs of the same browser makes one participant, not two: the browser remembers who joined. Use a second device or a private window.